New Exhibition Series Honors Decades of Creative Exploration

 

ATLANTA, Georgia (August 25, 2025) -- Legacies in Paper: Nancy Cohen, Sara Garden Armstrong, & Helen Hiebert is on view at the Robert C. Williams Museum of Papermaking, September 4, 2025, through January 30, 2026. The exhibit brings together the work of three artists who have incorporated hand papermaking into their artistic practices for years. Nancy Cohen, Sara Garden Armstrong, and Helen Hiebert each describe a formative period of searching for versatile materials with the ability to take on the qualities required for two and three-dimensional work; could mimic textures of nature and the body; and could facilitate installation work of various scales. Individually, each artist found that the unique medium of hand papermaking could be transformed to encompass their visions, and it quickly became integral to their artwork. 

Armstrong, Cohen, and Hiebert build on the legacy of a community of artists pushing the craft of papermaking forward into contemporary forms. They bring unique voices to the medium: Hiebert’s luminous constructions explore the interplay of light and structure; Cohen’s sculptural works reflect ecological fragility and resilience; and Armstrong’s immersive environments blur the boundaries between the organic and the engineered. Together, their works speak to the transformative potential of paper—not only as a surface for expression but as a sculptural, spatial, and conceptual force. Through their hands, paper becomes a language of memory, a vessel of emotion, and a bridge between past and present. 

Join the museum staff and featured artists for a reception, 4-7 pm, Thursday, September 4, 2025 at 500 Tenth St. NW, Atlanta, GA 30332. This event is free and open to the public.

A full listing of associated programs can be found at https://paper.gatech.edu/program-listing 

Sara Garden Armstrong received her Master of Fine Arts from the University of Alabama and a Master of Art Education from UAB. A past recipient of the Joan Mitchell Foundation CALL (Creating a Living Legacy) project, Armstrong’s national and international exhibition record extends over a period of more than 40 years. Her artist’s books can be found in the collections of the Museum of Modern Art, New York, and the Victoria and Albert Museum, London, among others. Atrium commissions have focused on scientific phenomena and their interactions with the human condition. Armstrong currently lives and works in Birmingham, Alabama. 

Nancy Cohen has an M.F.A. from Columbia University and a B.F.A from Rochester Institute of Technology. Awards include a Pollock Krasner Foundation Grant, The Murry Reich Distinguished Artist Award and six fellowships from the New Jersey State Council on the Arts. Museum collections include the Asheville Art Museum, Memphis Brooks Museum, Montclair Museum, NJ State Museum, Smith College Museum, Tang Teaching Museum, Weatherspoon Art Gallery, Yale University Art Gallery and the Zimmerli Museum. Cohen has completed large scale paper installations for the Noyes Museum, the Katonah Museum, the Power Point Gallery at Duke University and New Jersey City University, The CODA Museum in the Netherlands and the NTCRI Museum of Craft Design in Taiwan. She lives in Jersey City, New Jersey.

Helen Hiebert is a Colorado artist who constructs installations, sculptures, films, artists’ books and works in paper using handmade paper as her primary medium. She teaches, lectures and exhibits her work internationally and online, and is the author of several how-to books about papermaking and papercrafts. Helen has an extensive network of paper colleagues around the world and her interest in how things are made (from paper) keeps her up-to-date on current paper trends, which she writes about in her weekly blog called The Sunday Paper. She interviews papermakers and paper artists on her podcast Paper Talk, and she holds an annual paper retreat and papermaking master classes in her Red Cliff studio.

A new educational initiative is set to teach Atlanta high school students how to create electronics, wearable devices, and other technologies that are built on paper and craft materials.

Workshops hosted by the Robert C. Williams Museum of Papermaking and led by Georgia Tech Assistant Professor HyunJoo Oh will introduce about 60 students from Atlanta Public Schools to paper-based electronics through hands-on workshops.

The Williams Museum will open an exhibit titled “The Future of Paper” that displays designs created in the workshop alongside visionary examples of paper-based technologies from Georgia Tech researchers.

The exhibit, funded by the National Science Foundation, is slated to open to the public in 2027.

Oh is a researcher with joint appointments in the School of Interactive Computing and the School of Industrial Design. She leads the Computational Design and Craft (CoDe Craft) Group at Georgia Tech, where her team integrates everyday craft materials with computing to support creative exploration.

Oh believes paper could be widely used to support prototyping printed circuit boards (PCBs) as a sustainable alternative to silicon. While silicon is the most prominent material used by technology companies to build computer chips, it isn’t biodegradable. And it can be harmful to the environment and contribute to e-waste. 

Paper, however, provides an eco-friendly platform for printing conductive traces and mounting small electronic components. With the expansion of printed electronic tools and techniques, paper and similar materials have become more popular among technologists who develop sensing technologies and wearable devices.

“It’s widely available and accessible,” Oh said. “I can’t think of anything more affordable and approachable that young makers and the broader maker community can use for circuits than paper.

“Printed electronics traditionally required expensive equipment, but with recent innovation in materials science, conductive materials such as conductive pens and paint available in local arts and crafts stores can be used to build circuits on paper. We can also print circuits using a regular office inkjet printer with silver ink.”

Shared Vision

Shortly after arriving at Georgia Tech in 2019, Oh knew she had to develop a project that would let her partner with the Williams Museum. 

“I was captivated by the museum’s space and its celebration of paper,” she said. “I wanted a collaboration that would integrate technology in a way that complemented and respected the museum’s existing beauty.”

Museum director Virginia Howell said the project was a perfect match for the museum, which has documented the history of papermaking since it was founded in 1939 by the Massachusetts Institute of Technology. Georgia Tech became the new home of the museum in 2003.

With more than 100,000 objects in its collection — some dating back as far as 2,000 years ago — the museum is unique, Howell said. Most papermaking museums are typically located at an historic mill, but the Williams Museum covers the history of papermaking.

Howell said that before she met Oh, she had been looking for an exhibit that would display the possible future of papermaking.

“We do the past of paper fantastically well, and we do the present of paper well through our changing exhibitions,” Howell said. “The future of paper is something we haven’t spent a lot of time interpreting.”

Crafting the Future

Oh and Howell agree that young people will shape that future. Oh said paper is commonly linked to art in the education sphere. As the material’s use in technology increases, however, it can funnel the interests of students toward engineering and computing. 

Incorporating paper and craft materials can invite more students to explore engineering and computing concepts. After all, a circuit board created on paper isn’t so different from one built on a silicon PCB, Oh said.

“This approach can excite the kind of students who usually feel disconnected from electronics and computing,” she said. “It gives those who only see themselves as creative or artistic a way to enjoy technology and resonate with it.

“Usually when I work with young students, especially girls, if I start with something technical, their interest wanes. But when I present those same ideas through art using familiar materials like paper, they become more engaged and confident. That’s when they start to flourish.”

Oh and Howell will hold three rounds of 10-week workshops for the students — spring 2026, fall 2026, and spring 2027. The best designs from those workshops will be displayed in the exhibit.

“They’ll feel more comfortable with computing and engineering as an introductory experience,” Howell said. “When they successfully build on it and realize they did this on a sheet of paper, it’s exciting to think what they’ll do when they get more sophisticated tools and access.”

The National Science Foundation (NSF) has awarded School of Materials Science and Engineering (MSE) Professor & Regents’ Entrepreneur Rampi Ramprasad a $2 million grant to advance research at the intersection of artificial intelligence (AI) and polymer science. He and a multidisciplinary team of Georgia Tech researchers will design next-generation polymer-based packaging materials that can easily be recycled or biodegraded at the end of their use. The project addresses one of the most pressing challenges in global sustainability: plastic waste.

Read more on the Georgia Tech Materials Science and Engineering Newspage

With so many paths to research careers at Georgia Tech, finding the right one can be daunting. In an ongoing feature series, Unexpected Paths, we explore the journeys of 12 research faculty members from across the Institute and learn about their unique paths to research. In this feature, follow Angshuman Guin as he discusses his research into traffic patterns and how faculty serve as the connective tissue of the Institute. 

Read more »

The Renewable Bioproducts Institute (RBI) 2025 Spring Workshop, held May 12–13, brought together leading researchers, industry professionals and students to explore innovations in pulp and paper manufacturing. Hosted at the Kendeda Building and the Paper Tricentennial Building, the event opened with remarks from Carson Meredith, RBI executive director, and featured presentations on energy and resource efficiency, carbon accounting and competitiveness.

Highlights included talks on membrane separations, electrochemical processing and low-carbon fuels, with contributions from experts such as Chris Luettgen, Jose Gonzalez, Sankar Nair, Marta Hatzell and Dave Beck.

Insights from the 2025 RBI Spring Workshop

• Revolutionizing Kraft Pulping with Graphene Oxide Membranes
  Georgia Tech’s rGO membrane technology is transforming the kraft pulping process. These membranes enable efficient black liquor dewatering, organic acid recovery and lignin fractionation—leading to significant energy savings, water recycling and new revenue streams from bioproducts.
• North America’s Dual Challenge: High Emissions, High Opportunity
  While North America remains a pulp and paper powerhouse (15% of global capacity), it also has one of the highest carbon intensities. This presents both a challenge and an opportunity to lead in emissions reduction through asset renewal and innovation.
• Biogenic CO₂: From Emission to Asset
  Kraft pulp mills emit large volumes of biogenic CO₂—an untapped resource. With carbon capture and utilization (CCUS), mills could generate up to $300 million annually in carbon removal credits, turning emissions into economic value.
• Integrated Biorefineries: The Future of Pulp Mills
  The vision for pulp mills is evolving—from single-product facilities to multi-product biorefineries. Innovations like lignin-based materials, organic acid conversion to biofuels and advanced nanofiltration are paving the way for circular use of carbon in manufacturing.
• Decarbonization Is a Strategic Imperative
  With increasing regulatory and consumer pressure, especially from global brands targeting Scope 3 emissions, pulp and paper producers must act. Embracing technologies like rGO membranes and CCUS is not just sustainable—it’s essential for competitiveness.
• Electrochemical Carbon Capture and Conversion for On-Site Fuel Production
  Hatzell’s lab is pioneering the use of bipolar membrane (BPM) electrolysis to convert captured carbon (from bicarbonate solutions) into valuable fuels like CO and H₂. This approach enables:
  • 100% carbon utilization with more than 70% Faradaic efficiency for CO production.
  • Integration with pulp and paper processes to valorize CO₂ emissions instead of storing them.
  • Use of acid-stable single-atom nickel catalysts to improve selectivity and efficiency.
• The PAPER-ZERO Initiative
  This initiative explores transformative pathways to decarbonize the pulp and paper industry by:
  • Evaluating scenarios that eliminate combustion of black liquor and waste wood.
  • Investigating renewable energy integration and alternative uses for black liquor.
  • Assessing the cost, energy and environmental trade-offs of emerging technologies.

The workshop also featured a student poster session, networking opportunities and updates on APPTI collaborative projects. The event concluded with a meeting of the RBI Industry Advisory Board, reinforcing the institute’s role as a hub for partnership and innovation in renewable bioproducts.

“We’re grateful to our industry member partners for sharing their time and expertise,” said Belinda Vogel, research engagement manager. “The advisory board meeting highlighted how essential collaboration is in advancing basic science and renewable bioproduct manufacturing.”

Cyrus Aidun has been a distinguished professor at Georgia Tech’s George W. Woodruff School of Mechanical Engineering since 2003. His career is marked by groundbreaking research and significant contributions to fluid mechanics and bioengineering, establishing him as a leading figure in these fields.

In particular, Aidun has focused on industrial competitiveness. His efforts to reduce energy and water consumption in fiber composite products have attracted significant attention and funding. This research is critical for developing sustainable and cost-effective manufacturing processes while reducing environmental impact.

As principal investigator, Aidun has received funding for major projects from the Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE, with Devesh Ranjan as co-principal investigator), the DOE’s Advanced Research Projects Agency-Energy, and the Defense Advanced Research Projects Agency (with Art Rangauskas at the University of Tennessee). These projects are affiliated with Aidun’s development of the Multiphase Forming Lab at Georgia Tech’s Renewable Bioproducts Institute (RBI).

The only one of its kind in North America, this innovative system significantly reduces the amount of water required to process paper. As a result, the heat and energy needed to dry the paper — typically an energy-intensive process — are also reduced. The Multiphase Former uses up to 70% less water, which substantially lowers the energy required for drying. This research, which began about five years ago, has drawn broad interest from industry. A more recent project, funded by DOE-EERE and led by Carson Meredith, combines Multiphase Forming with the latest technologies in refining and drying.

Aidun earned his bachelor’s and master’s degrees from Rensselaer Polytechnic Institute and completed his Ph.D. at Clarkson University in 1985. He joined the Woodruff School in 2003 after serving two years as a program director at the National Science Foundation. He began at Georgia Tech in 1988 as an assistant professor at the Institute of Paper Science and Technology. Previously, he was a research scientist at Battelle Research Laboratories, a postdoctoral associate at Cornell University, and a senior research consultant at the National Science Foundation’s Supercomputer Center at Cornell.

Aidun has received several national and international honors, including the National Science Foundation Presidential Investigator Award, the Gunnar Nicholson Fellowship, and the L.E. Scriven Award from the International Society of Coating Science and Technology.

Georgia Tech's Renewable Bioproducts Institute (RBI) is pleased to announce the appointment of Hanjiang (John) Xu as director of the Multiphase Forming Lab. This strategic selection leverages Xu's extensive experience in papermaking, new product and process development, fluid mechanics, and project management.

The only one of its kind in North America, this innovative system significantly reduces the amount of water required to process paper. As a result, the heat and energy needed to dry the paper—typically an energy-intensive process—are also reduced. The Multiphase Forming Lab uses up to 70% less water, which substantially lowers the energy required for drying.

Xu brings over 20 years of experience in managing laboratory paper machines and pilot testing equipment, along with a robust background in fluid mechanics, material science, and instrumentation development. His professional experience includes significant roles at International Paper, AstenJohnson, and Georgia Tech’s George W. Woodruff School of Mechanical Engineering.

"We are thrilled to have John lead the establishment and operation of this new facility," said Carson Meredith, RBI executive director. "His extensive knowledge and industry experience make him the ideal leader to partner with both RBI members and non-members to drive reduced energy consumption and costs.”

Xu's career is marked by innovative research and successful commercialization of new products and processes. At AstenJohnson, he served as a senior research scientist, specializing in forming and press fabrics used in the paper industry. His work led to the commercialization of several new forming and press products, and he managed pilot press stand at AstenJohnson and participated in papermaking trials at different pilot facilities to evaluate the performance of these fabrics.

Prior to AstenJohnson, Xu held positions at International Paper's Corporate Technology Center, where he managed the Microfinishing Lab and Humidity Resistant Liner Lab. His research provided critical insights that influenced the company’s major business decisions. He also developed various unique instruments for different paper mills at International Paper.

Xu earned his Ph.D. in paper science and mechanical engineering from Georgia Tech’s Institute of Paper Science and Technology. His doctoral research focused on the measurement of fiber suspension flow and forming jet velocity profile using Pulsed Ultrasonic Doppler Velocimetry (PUDV). He also holds a B.S. in Material Science and Engineering from Tsinghua University in Beijing, China.

For more information about the Multiphase Forming Lab, please contact: Hanjiang (John) Xu at hanjiang.xu@me.gatech.edu

On May 13, 2025, Georgia Tech celebrated a major milestone in sustainable manufacturing with the ribbon cutting of its new Multiphase Forming Lab in the Paper Tricentennial Building. The event, hosted by the Renewable Bioproducts Institute (RBI), marked the official launch of a pioneering system that promises to revolutionize the papermaking industry.

The Multiphase Forming System, the only one of its kind in North America, dramatically reduces the amount of water needed in the paper production process. By using up to 70% less water, the system also significantly cuts down on the energy required for drying — traditionally one of the most energy-intensive steps in papermaking. This innovation, developed by principal investigator Cyrus Aidun, not only enhances efficiency but also supports broader sustainability goals by lowering greenhouse gas emissions.

The grand opening event featured remarks from Georgia Tech President Ángel Cabrera, Executive Vice President for Research Tim Lieuwen, and Carson Meredith, executive director of RBI, among others. Attendees included industry leaders, researchers, and students, all eager to witness the unveiling of a technology that has been five years in the making.

The Multiphase Forming project has garnered widespread interest from the paper and packaging industries. A recent extension of the research, funded by the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE), integrates this forming system with cutting-edge refining and drying technologies. Led by Meredith, this initiative aims to further reduce energy consumption and environmental impact in paper manufacturing. John Xu has been appointed to run the facility.

Meredith said, “Today is milestone in RBI’s history, as we continue to partner and innovate with the paper and pulp industry.  We’d like to share our gratitude with our researchers, students and industry sponsors International Paper, Kimberly Clark and Solenis.”

Every time you use your phone, open your computer or listen to your favorite music on AirPods, you are relying on critical minerals.

These materials are the tiny building blocks powering modern life. From lithium, cobalt, nickel and graphite in batteries to gallium in telecommunication systems that enable constant connectivity, critical minerals act as the essential vitamins of modern technology: small in volume but vital to function.

Yet the U.S. depends heavily on imports for most critical materials. In 2024 the U.S. imported 80% of rare earth elements it used, 100% of gallium and natural graphite, and 48% to 76% of lithium, nickel and cobalt, to name a few.

Read more »