May 31, 2022
High-tech Makers
11 min read
Georgia excels in advanced manufacturing for industries from aerospace to agriculture.
Read More
May 27, 2022
A break in the baby formula supply chain
7 min read
Georgia Tech experts explain how we got here and how long this shortage could last
Read More
May 26, 2022
ECE Plays Key Role in EcoCAR Mobility Challenge Win
3 min read
Multiple members of the School of Electrical and Computer Engineering (ECE) contributed to the four-year project.
Read More
May 24, 2022
Physical Internet Center Student and Faculty Researchers Receive Best Paper Awards at 2022 IISE Annual Conference and Expo
2 min read
Papers take 1st and 2nd in the Logistics and Supply Chain (LSC) Division and 1st place in the Facilities Design and Planning Track
Read More
May 4, 2022
GTMI Executive Director Finalists: Vision Presentations
3 min read
Finalists for the position of executive director of the Georgia Tech Manufacturing Institute (GTMI) will be delivering vision presentations during the week of May 9.
Read More
April 28, 2022
The U.S. Department of Energy, General Motors and MathWorks Announce Georgia Tech Selected to Participate in the EcoCAR EV Challenge
6 min read
The next DOE-sponsored Advanced Vehicle Technology Competition (AVTC) set to begin in Fall 2022.
Read More
April 15, 2022
Advanced Manufacturing Pilot Facility Hosts Open House Celebrating Launch of the Georgia Manufacturing 4.0 Consortium
4 min read
The Georgia Tech Manufacturing Institute (GTMI) hosted an open house to celebrate the launch of the Georgia Manufacturing 4.0 Consortium.
Read More
April 13, 2022
2022 Spring Undergraduate Research Symposium
2 min read
Undergraduate Research Opportunities Program (UROP) hosted the 16th annual Spring Undergraduate Research Symposium.
Read More
April 7, 2022
Georgia Tech Aiding in the National Response to Supply Chain Disruptions
3 min read
The SecureAmerica Institute (SAI) and the Advanced Robotics for Manufacturing (ARM) Institute are partnering with Georgia Tech to investigate how robotics and automation in manufacturing can enhance the resiliency, flexibility, and competitiveness of U.S.
Read More
April 6, 2022
Tasneem Wins IEEE SISC Award for Best Student Paper
2 min read
She is the first Georgia Tech student to receive this Semiconductor Interface Specialist Conference award.
Read More
March 29, 2022
The Future of 5G+ Infrastructure Could be Built Tile by Tile
5 min read
Manos Tentzeris and his team of Georgia Tech researchers flex their novel 5G+‐enabled massively scalable tile arrays
Read More
March 28, 2022
carSEAL to represent Georgia Tech at the 2022 ACC InVenture Prize
2 min read
On April 2, 2022, Team carSEAL will represent Georgia Tech in the 6th annual ACC InVenture Prize Competition hosted this year by Florida State University.
Read More
March 24, 2022
Georgia Tech Manufacturing Institute Begins Search for New Executive Director
2 min read
The Georgia Tech Manufacturing Institute (GTMI) has initiated a search for a the position of Executive Director.
Read More
March 17, 2022
You in the News: PatentX is Tokenizing Innovation
2 min read
During the summer of 2021, computer science student Neil Sanghavi and computer science recent grad Ahan Shah, both from Fairfax, VA, reconnected to develop their use of NFT technology to provide utility in an antiquated space that lacked efficiency.
Read More
March 3, 2022
BioMADE Supports Georgia Tech Researchers to Strengthen American Competitiveness in the Bioindustrial Manufacturing Industry
2 min read
BioMADE, a Manufacturing Innovation Institute sponsored by the U.S. Department of Defense, has recently funded a research project at Georgia Tech entitled ‘Stress Testing Supply Chains and their Ecosystems for Levels of Trust, Security, Resilience, Agilit
Read More
March 1, 2022
2022 InVenture Prize Finalists Revealed for Upcoming Live Show
2 min read
After almost a year of preparation, practice, and refinement, Georgia Tech’s annual InVenture Prize is down to six finalists competing in the final round on March 16th.
Read More
February 23, 2022
Aaron Stebner Seminar Named Top 5 3D Printing Videos by AM Chronicle
1 min read
Recording of the Machine Learning for Metals Additive Manufacturing seminar named one of the top 5 3D printing videos by the AM Chronicle.
Read More
February 18, 2022
Two Assistant Professors Earn NSF's Most Prestigious Early-Career Award
3 min read
ISyE Assistant Professors He Wang and Siva Theja Maguluri earn NSF CAREER Award.
Read More
February 16, 2022
SCL Welcomes Yentai Wan of UPS to its Industry Advisory Board
2 min read
We are very happy to have part of the Georgia Tech and ISyE family rejoin us to help determine SCL's future direction.
Read More
January 31, 2022
Young Unravels Roots of Trade Compliance at the WTO in Latest Book
4 min read
Alasdair Young's new book examines the roots of European Union compliance with World Trade Organization rulings.
Read More